Monday, January 31, 2011

Panasonic AG-AF101/102 Professional HD Camera Recorder


Panasonic AG-AF101/102 Professional HD Camera Recorder


Panasonic AG-AF101/102

Panasonic AG-AF101/102  4/3" large image video camcorder
•  Large 4/3" "Best-in-Class" MOS imager with fast image scanning and optical and low pass filters that eliminate aliasing and moire while minimizing skew
•  Records in 1080 (60i, 50i, 30p, 25p and 24p native) and 720 (60p, 50p, 30p, 25p and 24p native, utilizing AVCCAM's highest-quality PH mode (maximum 24Mbps)
•  Variable frame rates in 24P, 30P and 25P in1080, up to 60P or 50p dependent on 60Hz or 50Hz mode
•  Uncompressed 4:2:2, 8 Bit HD-SDI and HDMI output
•  Six built-in, customizable Scene Files that can be utilized for instant, easy
   matching between multiple cameras
•  Built-in gamma curves including HD Norm, HD Low and High, Cine-like D, Cine-like V, B.Stretch
•  Four selectable color matrices including Norm 1 and Norm 2, Fluorescent and
   Cinelike
•  Color Phase and Saturation, Pedestal and Detail image control
•  Two card slots that support continuous (relay) recording. Relay recording means that with two 32GB SDHC cards you can record for 6 hours with automatic clip spanning across the two cards
•  SDXC Card compatibility -- with a 64GB SDXC card, you can record for 12 hours
    in PH Mode, and 48 hours in HG Mode
•  HD Video and Full Audio monitoring during record and playback with high-quality audio pre-amps at the input
Panasonic AG-AF101
Panasonic AG-AF102

Suggested Accessories
ST-7JP Camcorder support-shoulder mount
Convergent Design nanoFlash
Vocas MB-255 mattebox kit for Panasonic
AG-AF101/102
Litepanels 1x1 2-Lite Kit / Flypak
Litepanels 1x1 4-Lite Kit / Flypak

Tuesday, January 18, 2011

Sony PMW-F3 Super 35mm Digital Cinematography Camcorder – Pre-Order Now

 

Sony PMW-F3 Super 35mm Digital Cinematography Camcorder – Pre-Order Now

Sony PMW-F3



Sony PMW-F3 Super 35mm Digital Cinematography Camcorder•  Uses a newly developed Super 35mm CMOS Image Sensor with a shallow   
   depth of filed, high sensitivity, and excellent signal-to-noise ratio.
•  Employs a PL lens mount to allow flexible use of 35mm cinema lenses.
•  1920 x 1080 HD recording using the "MPEG-2 Long GOP" Codec
   Uses the same MPEG2 Long GOP Codec and SxS recording media
   as the rest of the XDCAM EX family for full 1920x1080 HD Recording, utilizing
   the “ready-to-use” XDCAM EX file-base workflow.
•  RGB and S-Log output will be available as a future optional RGB and 3G SDI
   software upgrade, allowing for a seemless workflow for high-end content
   creation with HDCAM-SR series products.
•  To make full use of the wide dynamic range of the newly developed CMOS
   imager, the PMW-F3 can be equipped with S-Log gamma, allowing users to
   flexibly adjust captured images as they wish in the post-production process.
•  PL Mount Adapter for compatibility with 35mm Cine Lenses
•  23.98P Native Recording
•  Slow & Quick Motion Function
•  Selectable Bit Rates
•  Multiple-format recording - 1080/720 and Interlace/Progressive switchable
   operation
•  Slow Shutter Function
•  High-quality uncompressed audio recording
•  SxS Memory Cards combine high transfer speeds and high reliability
•  Exceptional workflow flexibility
•  Long Recording Time
•  3.5-inch Hybrid Colour LCD Screen / Viewfinder
•  Genlock and Timecode Interfaces
•  3D System Link Option* Available from Autumn 2011
•  Remote Control Capability
•  Compact Design
Sony PMWF3K (camera with lens)
Sony PMWF3L (camera without lens)
Sony PMW-F3K with Vocas MB-255

Suggested Accessories
Convergent Design nanoFlash
Carl Zeiss Compact Prime T2 1/28 mm (meter)
Carl Zeiss Compact Prime T1 5/50 mm (meter)

  

Most affordable range of teleprompter suitable to be used in most conditions both outdoor and studio application


Most affordable range of teleprompter suitable to be used in most conditions both outdoor and studio application
Teleprompter VSS-17/19
The VSS-17 teleprompter set includes a tube with a translucent mirror 400 x 400 mm, bearing platform, 17-inch color TFT monitor with cables, control foot-pedal with a cable, specialized software VSPrompte2.0b. The VSS-19 set differs a tube with a translucent mirror 480 x 480 mm and 19-inch color TFT monitor.

Click to view details

VSS-10A
VSS-10B2
Portable teleprompter VSS-10 A/B2
Designed for use out of studios. Provides the projection of a readable text to the translucent glass located before an objective of a videocamera.

VSS-10A Teleprompter + Monitor + Software

VSS-10B2 Teleprompter + Monitor + Software + additional Monitor
Click to view details

Teleprompter for presentations VSS-20
Produced for text prompting during the speech.The text projects from the monitor to the semi transparent mirror.The prompter should be placed in front of the speaker. The scrolling text is controlled by operator. The mirror should be placed so that the speaker will look at the middle of the hall.

VSS-20 Teleprompter + Monitor + Software

Click to view details


Teleprompter software VSPrompte2.0b
•  Support Dual/Single monitor mode
• 
Designed for Microsoft Windows 2000/XP/Vista 32bit operating systems
• 
Embedded text editor based on Rich edit text format
•  Support RTF text files on scrolling, allows to use RTF features like selecting    different fonts with different effects (BOLD, ITALIC, UNDERLINE and font color)    per single text line
• 
Profile database for storing individual user settings
•  Modifiable speed table
•  Modifiable layout of scrolling aria (size and position)
•  Additional information for reader – timer (total, remain), reader/lens pointer,    script name etc
•  Run list
•  Operator preview window on dual monitor mode
•  Can be controlled with: foot pedal, Contour Design ShuttleXpress, keyboard    and mouse
Click to view details

Bundled with Teleprompters

ST-7 Cameras Support: Shoulder Mount Adapter for Handheld Camcorders

ST-7 Cameras Support: Shoulder Mount Adapter for Handheld Camcorders
ST-7 Shoulder Mount Adapter




Click here to view video



ST-7 Shoulder Mount adapter
Applicable model : Sony PMW-EX3Enabling handheld camcorders shoulder-mounted

Allow mounting of Professional V-mount ( V-mount Plate supplied ) or
G-mount ( converter plate needed- QR-DSR -Optional item ) professional battery- thus extending the camcorder operating hour as compared to supplied battery XLR4 DC IN (12V) x1, XLR4 DC OUT (12V) x1

  

3x external BNC connectors to extend the camcorder output externally, thus allowing quick connection and removal of the cable V-wedge plate (supplied) allowing directed mounting onto the  tripod plate eg. VCT-U14

ST-7 Can be mounted on the Professional Tripod plate
Size 104x170x449mm
Weight : Approximately 1.0kg


Click here to Order

ST-7JS Shoulder Mount Adapter


ST-7JS Shoulder Mount Adapter
Applicable model : Sony HVRZ5, HVRZ7, PMW-EX1
Enabling handheld camcorders shoulder-adaptor
XLR4 DC IN (12V) x1, XLR4 DC OUT (12V) x1, MINI4P DC OUT (12V/8.4V), Lithium-ion battery input x1, Tripod screw 1/4 inch with camera screw turn prevention x1 and spare tripod screw x1.
BNC extension terminal x3, Circuit built-in which continues to send a power to the camera even if it short-circuits with Canon 4 P output. Light can be used. Just fit shoulder pad,
Operation T:0℃~40
Storage T:-20
℃~60
Size 153x240x449mm
Weight : Approximately 1.5kg


Click here to Order

ST-7JP Shoulder Mount Adapter


ST-7JP Shoulder Mount Adapter
Applicable model : Panasonic AG-HPX170 / AG-HPX171 / AG-HPX172 /
AG-HPX174 /AG-HPX175 / AG-HMC150 / AG-HMC151 / AG-HMC152 / AG-HMC153 / AG-HMC154 / AG-HMC155
V-mount lithium-ion battery can be mounted to the rear of the shoulder adapter ST-7JP.

DC power can be supplied to a camcorder via D-Tap. DC out is equipped on the side panel to supply DC power to  light or  monitor etc.

I/O consist of XLR4 DC IN (12V) x1, XLR4 DC OUT (12V) x1.  MINI4P DC OUT (12V/8.4V), lithium-ion battery input x1, Tripod screw 1/4 inch with camera screw turn prevention x1 and spare tripod screw x1,
BNC extension terminal x3, Circuit built-in which continues to send a power to the camera even if it short-circuits with Canon 4 P output.
Light can be attached. Fitted with shoulder pad
Operation T: 0℃~40
Storage T: -20
℃~60
Size 153x240x449mm (WHD)
Weight: approx. 1.5Kg


Click here to Order

ST-7JC Shoulder Mount Adapter



ST-7JC Shoulder Mount Adapter
Applicable model : Canon XF300 , XF305
XLR4 DC IN (12V) x1, XLR4 DC OUT (12V) x1, D-Tap x1
MINI4P DC OUT (12V/8.4V), lithium-ion battery input x1, Tripod screw 1/4 inch with camera screw turn prevention x1 and spare tripod screw x1.
BNC extension terminal x3, Circuit built-in which continues to send a power to the camera even if it short-circuits with Canon 4 P output. Light can be used. Just fit shoulder pad.
Operation T: 0℃~40
Storage T:-20
℃~60
Size 153x240x449mm
Weight : approx. 1.6kg


Click here to Order

Get Your Camera Rigs for Video and DSLR Cameras

Get Your Camera Rigs for Video and DSLR Cameras
MXGlide COMPACQ
Specifications:
- Standard Size: 700x180x65mm
- Rail Length: 680mm
- Track Width: 80mm
- Carriage Width: 80mm
- Payload: Up to 5kg

Mountings:
- 1 x 3/8” Carriage stud.
- 1 x 1/4” Threaded mount
- Additional mounting options
Rail Lengths:
- 680mm (Standard)
- 400-800mm

Click here to order

MXGlide 1660
Specifications:
- Standard Size: 1020x220x95mm
- Rail Length: 1000mm
- Track Width: 60mm
- Carriage Width: 150mm
- Payload: Up to 8kg

Mountings:
- 1x 3/8” Carriage stud
- Inter-changeable stud & bolt carriage mounts
- 3 x 1/4” Threaded mount
- 3 x 3/8” Threaded mount
- Additional mounting options
Rail Lengths:
- 1000mm (Standard)
- 500-1500mm

Click here to order

Reliable, Lightweight, Go Anywhere or Adapt to Any Situation Miller Tripod

Reliable, Lightweight, Go Anywhere or Adapt to Any Situation Miller Tripod
DS10 Solo DV
Carbon Fibre Tripod System


(1511)
DS10 Solo DV Carbon Fibre System
The SOLO 10 system combines the ultralight, ultra rigid carbon fibre SOLO tripod with the versatile DS10 75mm ball levelling head & selectable counterbalance. With a height range from 8" all the way up to 63" SOLO 10 suits 5lb - 10lb MiniDV and DVCAM payloads from barebones to fully stacked PD150 or Canon XL-1.
Features:
•  Flick-of-a-switch 5-10lb CB selection
•  True fluid pan and tilt drag
•  75mm ball leveling
•  Quick Release sliding plate
•  2-Stage Carbon/magnesium telescoping


Click here to Order

DS5 Solo DV Alloy System


(1637)
DS5 Solo DV Alloy System
The DS5 SOLO DV 2-stage Alloy system gets your Sony PDX10, Panasonic DVX-100 or JVC HD-10 right down to 8" and all the way up to 63" with rock solid stability and ultra-light weight. SOLO combines the new SOLO DV telescoping alloy tripod with the smooth-as-silk drag of the DS5 75mm ball levelling true fluid head.
Features:
•  Ultrasmooth, true fluid drag
•  75mm adjustable ball leveling
•  Quick release sliding camera plate with 1/4" & pin
•  Alloy/magnesium 2-Stage telescoping
•  Leg angle locks for 8" - 63" height range
•  Spike/Rubber feet support


Click here to Order

DS10 Solo DV Alloy System


(1640)
DS10 Solo DV Alloy System
The SOLO 10 system combines the ultra rigid alloy SOLO tripod with the versatile DS10 75mm ball levelling head & selectable counterbalance. With a height range from 8" all the way up to 63" SOLO 10 suits 5lb - 10lb MiniDV and DVCAM payloads from barebones to fully stacked PD150 or Canon XL-1.
Features:
•  Flick-of-a-switch 5-10lb CB selection
•  True fluid pan and tilt
•  75mm ball leveling
•  QR sliding plate
•  2-Stage alloy/magnesium telescoping


Click here to Order

DS20 Solo DV Alloy System


(1643)
DS20 Solo DV Alloy System
The SOLO DV 20 ALLOY offers incredible price-performance support for 10lb XL-1 and 20lb DSR390 DVCAM payloads. Designed around the popular Miller DS20 with 'flick-of-a-switch' selectable counterbalance, SOLO DV 20 ALLOY features a choice of 1/4" & pin or 1/4" & 3/8" screw mounts with sliding quick release mount for lens and battery changes. The SOLO DV 2-Stage ALLOY tripod complements this lightweight, true fluid drag support for all DVCAMcorders.
Features:
•  True fluid pan and tilt
•  SOLO DV Alloy telescope tubing
•  75mm ball leveling
•  Quick Release sliding camera plate
•  flick-of-a-switch 10 - 20lb CB selection


Click here to Order

Solo DV 3-Stage 75mm
Carbon Fibre Tripod


(2001)
Solo DV 3-Stage 75mm Carbon Fibre Tripod
Using the most advanced carbon fibre tubing, Solo tripods give you a solid operating height in a lean and light design. In addition to the sleek telescoping design, the new 3-stage Solo DV tripod gives a greater height range with a lightweight 75mm bowl. While the new Solo DV 3-stage tripod may be the tallest 75mm tripod available, its 3-stage design offers the smallest packing size for travel. You will not need Baby Legs or a Hi-hat with the renown super-low Solo tripod range. A low height setting down to 22cm (8.7in), no spreader and easy ball levelling, you are guaranteed of superbly stable images from any angle across any terrain.
Features:
•  Industry-Standard 75mm ball leveling
•  Unbelievable 9" - 73" height range
•  Ultra light Carbon, magnesium design
•  3-position Leg Angle locking - no spreader
•  3-stage ring lock leg extension
•  Air Cell carry strap
•  Spike or wind-down rubber feet


Click here to Order

Compass15 Solo 3-Stage Carbon Fibre System

(2020)
Compass15 Solo 3-Stage Carbon Fibre System
The Compass15 Solo DV 3-Stage Carbon Fibre system combines the new released lightweight Solo 3-stage tripod and Compass15 fluid head to provide professional performance for the latest generation of lightweight HDV/DVCAM/XDCAM and P2HD cameras which makes it an ideal travel companion.
Features:
•  Five selectable positions of high performance drag plus a zero position
•  Selectable counterbalance system for payloads between 2-10kg
•  Quick release, 60mm sliding camera plate
•  Solo DV 3-Stage Carbon Fibre tripod
•  Leg angle lock for 9"-73" height range
•  Spike/Rubber feet support
•  75mm ball levelling


Click here to Order

Reliable, Lightweight, Go Anywhere or Adapt to Any Situation Miller Tripod

Reliable, Lightweight, Go Anywhere or Adapt to Any Situation Miller Tripod
DS20 2-Stage Alloy System (ground spreader)

(848)
DS20 2-Stage Alloy System (ground spreader)
2-Stage height versatility in a stable support package gives DVCAM/ DVCPRO users cost-competitiveness with full broadcast performance.
Features:
Fluid Pan and Tilt head with 75mm ball leveling
Extra 5kg CB for large lens/battery DVCAM
2-Stage Alloy tripod with toggle locks
Sliding plate: 1/4" & 3/8" screws ir 1/4" & pin
Reinforced weatherproof carry case


Click here to Order

Sprinter II 2-Stage Alloy Tripod

(1580)
Sprinter II 2-Stage Alloy Tripod
The new Sprinter II ENG tripod range features Miller Sprint-Loks- Dual, side-action leg locks that let you independently adjust both stages of a 2- stage tripod using one hand. Each tripod leg has two Sprint-Loks, co-located on the upper leg clamp. The result: high speed adjustment, no more bending down to adjust the lower tripod stage.
Features:
•  Easily accessible, high speed dual action locks
•  Lightweight and rigid tripod construction
•  Tripods model suits fine height adjsutable mid level spreader
•  Inline carry handle
•  Rapid action transport clips


Click here to Order

Special mounts: Hi-Hat

(465)
75mm Hi Hat
The 465 Hi-Hat is for achieving ultra low shot angles. The 465 Hi-Hat is suited to all 75mm ball levelling fluid heads and can be bolted permanently to any flat surface.
Features:
•  Bolts to any flat surface
•  Can be permanently mounted
•  Suits 75mm ball levelling heads


Click here to Order

Special mounts: Solo Pod

(311)
Solopod
The NEW Miller SOLO POD extends the SOLO carbon fibre range to feature a lightweight quality monopod for the Professional DV shooter. The ultra-stable precision made SOLO POD has a 3 stage telescoping leg treated with the same comfortable neoprene grip well known to the SOLO range of products. Boasting a height range of 0.5 - 1.6m the SOLO POD and weighing 0.7kg this lightweight addition to your camera support kit is a must for those tight-fit applications in the field.

Features:
•  0.53m - 1.69m height range
•  Ultra light Carbon Fibre design
•  3 Stage ring lock extensions
•  Reversible thread 3/8" or 1/4" screw
•  Carry strap for transport
•  Fixed non-skid rubber foot


Click here to Order

We call it Litepanels. You'll call it a revolution in Lighting.


We call it Litepanels. You'll call it a revolution in Lighting.
Litepanels Micro Pro
•  ENG/DV/DSLR Friendly design
•  50W output
•  Variety of mounting options
•  Absolutely flicker-free output
•  HD Friendly
•  Click to view details

Litepanels Micro Pro hybrid
•  World's First Continous LED light combined with a "Flash" Feature
•  Shift free, Flicker free, Heat free
•  ENG/DV/DSLR Friendly design
•  Luminous,Soft, directional lights
•  Ideal for DSLR and HDSLR
•  Click to view details

Litepanels Micro
•  Higly controllable
•  Not power hungry (1.5 hours of continous output from just
    4 AA batteries)

•  Various Mounting options
•  Optional Mini DV Adapter plate
•  Heat free
•  Click to view details

Litepanels 1x1 give you an unmatched level of lighting control and versatility


Litepanels 1x1 give you an unmatched level of lighting control and versatility


Litepanels
1x1 Standard
Litepanels 1x1 Standard•  Only 1.75" (44mm) thick
•  Ultra lightweight & portable
•  Heat-free & flicker-free
•  Available in 5600°K Flood & Spot And 3200°K Flood
•  Quick set up and operation
•  Provides soft, directional, luminous output
•  2’x2’ and 4’x4’ multi-panel configurations to fit a wide range of jobs
•  Runs on AC adapter or battery
•  Power Efficient
•  Allows for location shooting without generators or power cables

LP-F
1X1 Flood Daylight (5600K) Beam spread: 50 deg
LP-S
1X1 Spot Daylight (5600K) Beam spread: 30 deg
LP-FT
1X1 Flood Tungsten (3200K) Beam spread: 50 deg


LP1-BCF
Litepanels 1x1 Bi-Color
Litepanels 1x1 Bi-Color•  Dial-up variable color (cool white daylight to warm white tungsten)
•  Dial-up brightness
•  Adjust color temperature instantly
•  Adapt to different shooting conditions on the fly
•  Only 1'x1' square and just 1.75" thick
•  Ultra-lightweight
•  Cool to the touch
•  Integrated DMX (RJ45 connectors)
•  Preset or variable color settings
•  Runs on battery or AC
•  Power Efficient

Click here to order



Litepanels
1x1 Bi-Focus
Litepanels 1x1 Bi-Focus•  Variable Spot And Flood 5600°K
•  First LED light fixture capable of variable spot and flood focusing
•  Instantly vary the width of light beam
•  Extreme Portability
•  Dial-up brightness
•  Runs on battery or AC
•  Power Efficient
•  Only 1'x1' square and just 1.75" thick
•  Cool to the touch
•  Ultra-lightweight
•  Integrated DMX
LP1-BFS/F
1X1 Bi-Focus - Daylight Spot (30 degree) &
Daylight Flood (50 degree)
LP1-BFS/SS
1X1 Bi-Focus - Daylight Spot (30 degree) &
Daylight Super-Spot (15 degree)


LP1-SS
Litepanels
1x1 Superspot
Litepanels 1x1 Superspot
•  5600°K Beam With 15-Degree Beam Angle
•  Concentrates light in smaller area, and provides longer throw of light•  Measures 12" W x 12" H x 1.75" D
•  Weighs just 1.36kg
•  Lightweight, ultra flat-profile system
•  Equipped with remote dimming capability
•  Runs on battery or AC
•  Power Efficient



Litepanels
1x1 Low-Profile
Litepanels 1x1 Low-Profile•  Takes Up Only 3” Of Headroom•  No loss of headroom or room space
•  Tilted at 40 degrees off axis
•  Light projected forward to softly light subject
•  Draws little power
•  Cool to the touch
•  Integrated DMX
LP1-F-LOW
1X1 Low-Profile Flood Daylight (5600K)
Beam spread: 50 degree
LP1-FT-LOW
1X1 Low-Profile Flood Tungsten (3200K)
Beam spread: 50 degree
LP1-S-LOW
1X1 Low-Profile Spot Daylight (5600K)
Beam spread: 30 degree
LP1-SS-LOW
1X1 Low-Profile Super-Spot Daylight (5600K) Beam spread: 15 degree



Litepanels 1x1 Packages
Litepanels 1x1 Packages